IATF16949:2016 Quality Management System certified
Turing Center Horizontal CNC lathe machine CLK6150P/CLK6156
STANDARD CONFIGURATION
1) 1000mm Horizontal lathe bed.
2)guideway surface of longitudinal,cross slide stick PTFE, motor of longitudinal,cross directly connect. longitudinal,cross lead screws adopts special angular contact ball bearing.
3) Conversion frequency 3-shift manual, change speed by turn chuck with hand,A type spindle nose, Main motor: 7.5KW
4) Spindle built-in forced oil lubrication;
5) general manual 3-jaw chuck 250mm.
6) 4-position exampt uplift electric tool post.
7) Manual tailstock;
8) Auto intermittent electric lubrication pump.
9)double sliding door Semi-protection.
10)stationary type electronic handwheel;
11) Work light
12) Water cooling
13) Manual iron plate
14) GSK980TD CNC system.
OPTION CONFIGURATION
1)FANUC/HNC-21TD/GSK980TD/GT66T/KND CNC system.
2) Horizontal lathe bed 1500mm
3)double sliding door Full-protection.
4) General manual 3-jaw chuck 320mm;general manual 4-jaw chuck 320mm, 350mm;
5)Hydraulic pneumatic hollow, solid φ250, φ315 3-jaw power chuck, 2-jaw power chuck,collet chuck.
6) 6-position electric tool post,with T-slot cross slide carriage,gang tool cross slie carriage(Positive, negative cutter holder, boring cutter holder )
7)manul follow rest,steady rest,hydraulic auto follow rest.
8)Hydraulic, pneumatic automatic tailstock;
Items(cnc lathe machine) | Unit | CLK6150P | CLK6156 | |
Max.swing bed | mm | 500 | 560 | |
X-direction gudieway span | mm | 220 | ||
y-direction gudieway span | mm | 420 | ||
Max.swing over cross slide | mm | 280 | 325 | |
Distance between the two center | mm | 1000 | 1500 | |
Max. turning length | mm | 820 | 1320 | |
Center high:from bed | mm | 255 | 280 | |
Center high:from ground | mm | 1145 | 1170 | |
Spindle bore | mm | 89 | ||
Hollow chuck through the hole | mm | 76(optional) | ||
Max dia.of the bar throuth spindle | mm | 85 | ||
Spindle nose type |
| A8 | ||
chuck | mm | 250 | ||
Spindle taper |
| Metric 100,1:20 | ||
Spindle speed | r/min | Manual /Hydraulic auto 3-shifts H:450-1600 M:130-470 L:40-150 | ||
Tool post number |
| 4/6(-optional) | ||
Tool size | mm | 25*25(4-position) 32*32(6-position) | 32*32 | |
X:lead screw SPEC. | mm | FFZD2504-3-P3 | ||
Z:lead screw SPEC. | mm | FFZD4008-5-P3 | ||
x/z rapid | m/min | 6/10 | ||
X-direction travel | mm | 310 | ||
Min setteing unit | mm | 0.001 | ||
Tailstock sleeve diameter | mm | 75 | ||
Tailstock sleeve taper |
| MT 5 | ||
Tailstock sleeve travel | mm | 150 | ||
Tailstock congigraton |
| Manual,pneumatic,hydraulic | ||
Total power | Kw | 12.5/16 | ||
Main motor power | Kw | 7.5/11 | ||
N/W | kg | 2250/2410 | 2450/2560 | |
Overall dimension | mm | 2570*1550*1700 | 3070*1300*1710 |
Send your Inquiry Details in the Below , Click "Send" Now !
Copyright © Ningbo Luteng Precision Machinery Co.,Ltd | All Rights Reserved